Heaters - 2

Product Details:

Infrared heating is a heating method used to warm surrounding bodies by infrared radiation. Thermal energy is transferred directly to a material with a lower ...Any customized sizes and watts can be  made

Product Details:

Industrial heaters are used in a variety of processes where the temperature of an object or process needs to be increased

Product Details:

Boilers heat water, and provide either hot water or steam for heating. Steam is distributed via pipes to steam radiators, and hot water can be distributed via baseboard radiators or radiant floor systems, or can heat air via a coil.

Product Details:

noun. an electrical device, usually thermostatically controlled, for heating the liquid in which it is immersed, esp as a fixture in a domestic hot-water tank.

Product Details:

Silicone Rubber heaters with wire-wound elements provide excellent physical strength capable of withstanding repeated flexing without compromising the life and performance of the heater. They are also very effective for manufacturing geometrically challenged shapes, including three dimensional ones.

Product Details:

Silicone rubber heaters are very flexible and resistant to most chemicals. Often used for Process Heat, Condensation Control, Freeze Protection and Composite Bonding / Curing, silicone heaters are the perfect choice for heating irregular shapes and curved surfaces.

Product Details:

This Machine Is Operated With Heater And Motor. First Of All Start Machine Before 15 Minute And Adjust Degree To 180 – 200 And That Will Be Behind The Machine. From Output Are Semi Cooked Chapati Will Come And Then After You Have To Roasting Manually For Final Cooked Chapati With Original Teast.

Product Details:

Mica Nozzle Heaters deliver reliable high-temperature heating to cylindrical surfaces. They are available in one-piece or two-piece construction along with a variety of diameters, widths, voltages, and wattages clamp styles and power connections.

Product Details:

Heater Plate is provided in a wide variety of applications from low to high voltage. This Heater Plate is used for domestic purpose available in different sizes at a good market price. These are cost efficient, energy efficient and environment friendly, which can be used in all kinds of climate.

Product Details:

During the winter, as your furnace uses gas or electricity to generate heat energy, the furnace coil acts as a heat exchanger, absorbing that heat so that the blower can distribute it through your air ducts.

Product Details:

Quality is the feature of our industry and to maintain unique quality standards we are immersed in offering a varied collection of Round Coil Heater.

Product Details:

Silicone Rubber Heaters are thin, flexible, electric heaters that can be used up to 500°F/260°C intermittently and 392°F/200°C continuously. They are physically resistant to many adverse operating conditions. They are manufactured with either a rough or smooth material and with either a wire wound or etched foil heating element. 

Product Details:

Manufactured from high temperature bearing insulators, Anupam's Porcelain Heaters offered are used in various industries. The Antique Porcelain Heater contains elements that are exposed partially in air for better transmission of heat. Porcelain Heater is extensively used in ovens, tanks where draining cannot be done to change the heaters. The Porcelain Heaters offered by us are known for their high precision, performance and durability. 

Product Details:

Immersion heaters are used in applications that require the heater to be immersed in the substance to be heated. They are equipped with pipe threads, flanges or other mounting hardware.
Measured in kilowatts (kW)

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

Finned heaters are constructed using Tempco's robust tubular element as the basis of construction. Fin material is continuously spiral wound tightly onto the element surface to increase the convective surface area for air and non-corrosive gas heating.

Product Details:

A cartridge heater is a tube-shaped, industrial heating element that can be inserted into drilled holes. Cartridge heaters provide localized and precise heating and are commonly used in the heating process industry.

Product Details:

Coil heaters are straight or pre-formed electrical heating elements with a metallic sheath. Once they are formed, they have a defined shape. They have a round or square or rectangular cross section and are available in a variety of shapes and sizes.

Product Details:

It is a heating cable formed of a semiconductor matrix inserted between two conductors, to which a voltage is applied. The more the matrix heats up, the more its resistance increases, until the cable reaches thermal equilibrium with its surrounding environment.

Product Details:

Insulating refractories are used to reduce the rate of heat loss through furnace walls. These refractories have low thermal conductivity due to a high degree of porosity, with a desired porous structure of small, uniform pores evenly distributed throughout the refractory brick in order to minimize thermal conductivity.

Product Details:

Furnace refractory is the ceramic component of the furnace that directly interfaces with the contained molten aluminium, also referred to as the working liner. The term "furnace refractory" may refer to either the working liner of a holding furnace or melting furnace.

Product Details:

Our offered range of Hot Runner Cartridge Heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with Mgo powder and compacted for faster and efficient heat transfer. These heaters are also offered as per the customer requirements. Features: Sheath temperature up to 800^o C.

Product Details:

DRUM HEATERS. The role of the drum heater is to keep the contents of the drum safe and warm against the perils of frost damage as well as the contamination of its contents - providing an optimal and uniform heating to drums ensuring viscosity control, freeze protection, temperature maintenance and melting of any solids ...

Product Details:

Our range of products include aluminium casted heaters, aluminium cast in heater, industrial plastics injection molding cast aluminium heater, cast heaters, brass casted heaters and aluminium casted heaters for dies.

Product Details:

Cast heaters are basically a heated part or tool that can be conceptualized and integrated as a component in a variety of equipment such as hot melt adhesive systems, food service, medical, packaging, paint spraying, semiconductor, and process pipelines.

Product Details:

Air heaters are devices used to heat air. They include forced air products as well as all types of radiant and space heaters. Forced air products moderate and control air temperature by circulating air past a heat source with a fan or blower.

Product Details:

The heating oven receives heated air from a battery (thermal oil-air heat exchanger) via a nozzle heated from above and below. Air ducts built of carbon steel plate. Support and anchorage are arranged on a suspended structure facilitating its linear expansion.

Product Details:

The fins on a coil accomplish two major functions: they straighten the air out as it comes in contact with the entering-air side of the coil, and they perform some of the heat transfer. Understand the basics of finned tube coils and maximize coil capacity and efficiency.

Product Details:

A drum heater – also called band heater, barrel heater, container heater or canister heater- is used to reduce viscosity of liquids and gels by heating in order to fill, pump or bottle the respective liquid or to prevent liquids from freezing inside the drum.

Product Details:

The advantages to these heaters are three fold; One: is that they tend to be even more accurate by having the sensor far from the heating element. Two: besides improved accuracy of a remote sensor, the accuracy is further improved by the Digital electronics of the newest generation Titanium Heaters

Product Details:

It is a heating cable formed of a semiconductor matrix inserted between two conductors, to which a voltage is applied. The more the matrix heats up, the more its resistance increases, until the cable reaches thermal equilibrium with its surrounding environment.

Product Details:

Heater cables takes the form of electrical heating elements to run in physical contact along the length of a pipe. The pipe is usually covered with thermal insulation for retain heat losses from the pipe. The heat generated by the element then maintains the temperature or the pipe